New gold tone finish wick holders. Package of 2 LARGER SIZE liquor bottle wick holders, 1 1/4" wide, the perfect size for patron bottles, larger liquor bottle openings, to create your tiki torch candles. This bottle wick holder includes an 8" section of round 3/16" wick to fit. BOTTLE NOT INCLUDED. We recommend paraffin oil as it is a safer oil to burn. Keep your wick low about 1/8" to prevent soot.
You may order more wick to fit this wick holder here - 3/16" Cotton Oil Candle Wick or our 3/16" Cotton Wrapped Fiberglass Wick.
KEEP OIL LEVELS HIGH FOR CONTINUOUS BURN OF YOUR OIL CANDLE.
- The flange width of this metal wick holder measures 1 1/4" (31mm)
- Overall length is 1" (25mm)
- Straight Lip Edge is raised 3/16" (5mm)
- Length of tube under the flange to bottom is 1/2" (12mm)
- Tube width extending down under the flange is 9/16" (13mm) (your bottle opening cannot be smaller than 15mm to allow a fit)
- Height the wick holder is raised above the flange is 1/2" (13mm)
Note: ALWAYS MEASURE THE OPENING OF THE WINE BOTTLE THAT YOU HAVE. There are many wine bottles that have different size openings! This is not a cork or a stopper, it is designed to hold the wick in place and sit on top of your bottle with the neck of the wick holder extending down inside of the bottle.
To insert the wick into the wick holder, compress one wick end and feed the wick in an upward motion through the bottom of the wick holder until it feeds through the top, then pull through.
